• Fixtures Header Image
  • Ford Structural Holding


    Ford & Lincoln Approved!

    We’ve expanded the capabilities of our successful Ford F-150 Aluminum Holding Package so it can be used when repairing the new Ford Expedition or Lincoln Navigator SUVs. Our Ford Holding package (300001) now includes additional rigid pad mounts and hardware to accommodate larger passenger compartments on these full-size SUVs.  Chief rigid pad mounts spread pressure out over a larger area of the passenger compartment, reducing the chance of causing additional damage during the repair. Confidently work on Expedition and Navigator SUVs with this versatile structural holding system from Chief. 

    Ford Aluminum Cab Holding System.

    Extend and distribute the pressures exerted over the entire cab while pulling with our specialty holding system. All of these specialty adapters allow you to secure the new aluminum cab to its frame and to the frame machine. Pressure is then extended over a larger area decreasing the risk of additional damage being introduced while pulling the vehicle. The videos presented give you an idea of Chief's philosophy in making sure the structure is maintained while pulling force is being applied. We always strive to bring you tools that make your life easier and bring whatever you pull back to specifications. These new Aluminum holding adapters give you many options while holding an aluminum made vehicle. Check out the videos and Contact Chief if you have any additional questions.

    See More Below

    Ford F150 Holding Package

    Ford F150 Holding Package
    Ford F150 Holding Package
    Ford F150 Holding Package
    Ford F150 Holding Package
    Ford F150 Holding Package
    Ford F150 Holding Package

    The Chief Structural Holding Package includes more than 50 components that can be combined in a variety of ways to secure a vehicle at a wide range of holding points. Vice clamps are included for use on frame-based trucks and vans, while unibody vehicles can be secured at their suspension mounting points or upper rails with bolt-on surface plate attachments. The entire contents of the Structural Holding Package come neatly arranged on a rolling tool board to keep everything organized and easy to move.

    Structural Holding Package 300001

    Part#300001 Weight:555 lbs. (252 kg)

    This Structural Holding Package is conveniently mounted on a tool board that outlines each component making it simple to identify where the part goes; all of this affixed to an easy-to-roll cart designed for the technician’s convenience and a clean looking shop.

    No. Part No. Qty. Description
    1 502000 2 Vertical Fixture Short
    2 502005 2 Horizontal Fixture Large
    3 502008 2 Vertical Fixture Tall
    4 502014 2 Wing Nut, Parts Holding - LH
    5 502015 4 Wing Nut, Parts Holding - RH
    6 502016 4 4" Extension Tub
    7 502017 2 12" Extension Tub
    8 502019 2 Tall Horizontal Fixture
    9 502026 2 Angle Adaptor Clamp Assembly
    10 502031 2 Base Plate
    11 502033 2 Adapter, Parts Holding Lower
    12 502034 2 Center Tub Parts Holding Turn Buckle
    13 502038 2 Rigging Nut
    14 502039 4 Structural Holding Adapter Assembly
    15 502042 2 Structural Vise Assembly
    16 502047 4 Structural Parts Holding Base
    17 502055 2 Short Tub Base Stand Assembly
    18 502058 4 Release Pin Assembly
    19 502060 2 Wrist Block
    20 502061 2 10” Extension Tub
    21 502063 2 Tall Tube Base Stand Assembly
    22 502067 1 Spanner Wrench Assembly
    22 502069 1 Spanner Wrench Assembly
    23 607371 6 Fastener Plate, UAS
    24 638133 2 Jaw Clamp Assembly
    26 502062 1 Bolt Tray, Structural Holding

    Vertical Fixtures

    Vertical fixtures
    can mount to locations such as the suspension mounting areas creating a very strong hold for structural repairs.

    Horizontal Fixtures

    The large horizontal fixture
    allows the ability to hold and control the end of a rail or structure for alignment or replacement of that component..

    Holding eight point

    The structural holding package
    can be used to make eight point holding where needed with suspension in or out.

    Full Frame

    The system can be used for Unitized and Full Frame vehicles utilizing the vise clamp to hold full frame rails.

    No. Part No. Qty. Description
    25 611311Y 2 Parts Holding Arm (on cart back)
    27 502070 1 Bolt Tray, Structural Holding, F150
    28 640114 4 F150 Runnung Board Bracket Assembly
    29 640004 4 Weldment, Pinchweld Base, F150
    30 498110 4 Pinch Jaw with Nails Complete
    31 640076 4 Formed Vertical Clamp, F150
    32 640120 6 Weldment, Cab Mount, F150
    33 640100 6 Support Plate, Cab Mount, F150
    34 682953 4 Plate, EZ-Liner Tie Bolt

    This Tool Board allows three ways to create holds for repairs:

    The Rigid Cab Mounts are used to replace the rubber factory cab mounts during structural repairs.

    Play Videos

    Additional holds can be made when using the 90° Angle Pinch-Weld Jaws that mount to the rocker flange inconjunction with the FAST Anchoring system.

    Play Videos

    A third method of holding is using the Running Board Fixture in conjunction with the base and fixture extensions within this parts package.

    Play Videos

    Chief Automotive Technologies reserves the right to alter product specifications and/or package components without notice. © 2014 Chief Automotive Technologies