• Fixtures Header Image
  • Cadillac CT6 Structural Holding

    Cadillac aluminum architecture holding system.

    As vehicle manufacturers incorporate aluminum into the structure of their vehicles, repair facilities will see a great demand on keeping their repair processes current. Chief provides you with the tools and technology to make sure the repairs are correct, and more importantly that they’re certified by the manufacturer. Many things fall on your shoulders to ensure that repairs are made correctly. Let Chief help usher in this aluminum age with our approved holding packages.

    See More Below

    CT6 Structural Holding User Manual

    CT6 Structural Holding Tool Board Cart

    Concepts for CT6 Structural Holding

    Cadillac CT6

    The Cadillac CT6 is manufactured without pinch welds and is broken down into various aluminum sections. Repairs are made with fixture holding and replacement parts. No structural pulling is done on the CT6.

    It is necessary to eliminate movement during repair. CK300014 accomplishes this by holding four primary center points at the torque box areas. Four additional points, two in the front section and two in the rear, hold the entire vehicle level. Chief’s CT6 holding package includes everything needed to hold these eight point, plus two more.

    Structural holding packages work in conjunction with our 3D live mapping measuring systems. Technicians can obtain guidance before, and during repairs and then report and print exact condition of frame before, during and after repairs to provide indisputable evidence of not only the damage but the quality of the repair.


    Structural Holding Package CK300003

    Part#CK30003 Total Weight:1110 lbs.

    This Structural Holding Package includes two tool boards below (Pictured front and back). Conveniently mounted boards show printed images of each component making it simple to identify where the part goes; all of this affixed to an easy-to-roll cart designed for the technician’s convenience and a clean looking shop.


    CT^ Holding Package

    Already own a Chief Structural Holding Kit 300000 or 300001? The above tool cart assembly can be purchased separately for CT6 structural holding with accessories part #CK300014

    No. Part No. Qty. Description
    1 502062 1 Bolt Tray, Structural Holding
    2 502055 4 Short Tube Base
    3 502082 4 3-3/4" Tube Base
    4 502015 4 RH Wing Nut
    5 502063 2 Tall Tube Base
    6 502074 4 Flat Fixture Base
    7 502000 4 Short Vertical Fixture
    8 502128 4 Base Assembly
    9 502075 6 11-1/2" Tube Base
    10 502008 2 Tall Vertical Fixture
    No. Part No. Qty. Description
    11 502110 1 Strut Tower Fixture Rear Left
    12 502117 1 Strut Tower Fixture Rear Right
    13 502120 1 Strut Tower Fixture Front Left
    14 502125 1 Strut Tower Fixture Front Right
    15 502143 2 Pillar Clamp Assembly
    16 502147 2 18" Tube Base Assembly
    17 502017 2 40mm Torque Box Holder w/Bracket
    18 502080 2 Fixture Peg Assembly
    19 540103 2 25mm Torque Box Holder w/Bracket
    20 502132 1 A-Pillar Fixture Mount
    21 502136 1 B-Pillar Fixture Mount Right
    22 502140 1 B-Pillar Fixture Mount Left

    Structural Holding Package CK300003 Continued.

    This is the base structural holding tool cart that is included with the package CK300003.

    CT6 Additional Cart

    No. Part No. Qty. Description
    1 502000 2 Vertical Fixture Short
    2 502005 2 Horizontal Fixture Large
    3 502008 2 Vertical Fixture Tall
    4 502014 2 Wing Nut, Parts Holding - LH
    5 502015 4 Wing Nut, Parts Holding - RH
    6 502016 4 4" Extension Tub
    7 502017 2 12" Extension Tub
    8 502019 2 Tall Horizontal Fixture
    9 502026 2 Angle Adaptor Clamp Assembly
    10 502031 2 Base Plate
    11 502033 2 Adapter, Parts Holding Lower
    12 502034 2 Center Tub Parts Holding Turn Buckle
    13 502038 2 Rigging Nut
    14 502039 4 Structural Holding Adapter Assembly
    15 502042 2 Structural Vise Assembly
    16 502047 4 Structural Parts Holding Base
    17 502055 2 Short Tub Base Stand Assembly
    18 502058 4 Release Pin Assembly
    19 502060 2 Wrist Block
    20 502061 2 10” Extension Tub
    21 502063 2 Tall Tube Base Stand Assembly
    22 502067 1 Spanner Wrench Assembly
    22 502069 1 Spanner Wrench Assembly
    23 607371 6 Fastener Plate, UAS
    24 638133 2 Jaw Clamp Assembly
    26 502062 1 Bolt Tray, Structural Holding
    No. Part No. Qty. Description
    25 611311Y 2 Parts Holding Arm (on cart back)
    611311y Parts Holding Arm
    Image of Parts Holding Arm in use.

    Chief Automotive Technologies reserves the right to alter product specifications and/or package components without notice. © 2014 Chief Automotive Technologies