• Frame Machine Header
  • Frame Machine / Frame Rack

    Frame machines are giant straight edges that won’t bend or flex under pulling forces, which is important when you are trying to bring a damaged vehicle back into factory specifications. All of our racks allow auto repair shops to put tremendous amounts of force against a vehicle once it is secured. We build racks that withstand multiple years of pulling force coupled with abuse that would turn any ordinary frame rack into a twisted pile of metal. When considering the purchase of a frame rack, choose one from the people who build more innovation and quality into the base structure than anyone else. Choose Chief and pull with confidence!

    Goliath™

    Goliath

    Never turn away business because of an undersized rack again. At 22-feet-long and 92-inches wide, Goliath™ can easily handle the biggest and baddest pick-ups, extended cab dualies and SUV’s around, and is the longest and strongest passenger car and truck pulling system Chief has ever produced.


    Learn More

    Titan™

    Titan

    From its brawny 10-ton towers to its impressive 12,000-pound lift capacity, the Titan™-360 combines all the raw power you’ll ever need with the innovative and easy-to-use features Chief is famous for to enable you to get the job done quickly, correctly and profitably.


    Learn More

    impulse™ E/VHT

    impulse-E/VHT

    Each E/VHT tower offers 10 tons of power at the hook

    • 10,000-pound lift capacity
    • Low pressure system offers more power and tighter control for faster, higher quality repairs

     


    Learn More

    EZ LINER® Express

    EZ-Liner

    Only EZ Liner® Express offers the right combination of features in a smaller, high quality collision pulling system - packaged to keep your shop on the cutting edge of today’s repair industry.

     

     


    Learn More


    Goliath Feature

    Goliath™

    Frame racks like the Chief Goliath™ provide multiple, simultaneous pulls with equalized pressure. This technique applies the same amount of pressure across multiple points of the damaged area at the exact same time, to prevent ripping, tearing, bending or rolling of high-strength steel. Pulling a single area at a time or pulling multiple areas without equalized pressure can actually put more damage into a vehicle. These Chief pulling systems also supply 10 tons of pulling power at the hook. Other systems may use 10-ton rams, but by the time the pressure gets to the hook, the pressure could have dropped to as little as four tons.


    • 22’ long and 92” wide,Goliath®can accommodate thelargest passenger vehicles withroom to spare
    • 12,000 pounds and offers sixworking height options from19” to 40”
    • Towers offer 10-tons of power at the hook and 1/2”chains proof tested to 14-tonsat the hook
    • 360-degree pulling; ganging of towers around the deck and simultaneous multiple pulling capabilities
    • Just one button controls thelift system and all up and downdeck movements.

    Learn More

    Titan Feature

    Titan™

    Why waste money on multiple racks orpulling systems that choke on the bigjobs, when the TitanTM-360 provides all thepower and performance you’ll ever need.

    When shopping for a new frame rack, repair professionals must first determine what kinds of vehicles the rack will be used for. For facilities that service trucks, SUVs and other full-frame vehicles, it is important that the frame rack has sufficient pulling power at each tower, a long deck and enough lifting capacity to raise the vehicle to a comfortable working height. Some systems may use powerful 10-ton rams, but the actual power at the hook may be as little as four tons. The Titan®-360 frame rack from Chief Automotive Technologies features 10 tons of pulling power at the hook.

    • ALL Titan towers feature 10 tons of pulling power at the hook.
    • Gang towers for simultaneous multiple pulls to precisely reverse damage for faster, higher quality repairs.
    • True 360-degree pulling withability to gang towers anywherearound the deck perimeter . . .even at the corners.
    • Titan’s 20-foot length and super-wide88-inch deck can handle everythingfrom small unitized frames toextended-cab dualies.
    • Rear tower roller bearings raiseoff channel when towers arelocked, and bear no weightduring pulls for years of effective,maintenance-free operation.

    Learn More


    impulse-E/VHT Feature

    impulse™ E/VHT

    Chief’s full-sized impulse®-E/VHT frame rack features 360-degree, multipoint pulling capabilities that allow technicians to isolate damaged areas for accurate, efficient repairs. The deck offers variable height settings for versatility and each pulling tower is equipped with 10,000 lbs. of power at the hook for handling nearly any job.

    • Simultaneous multiple pullingcapabilities with up to fourtowers, and each E/VHTtower boasts 10 tons ofpulling power at the hook.
    • True 360-degree pullingwith ability to gang towersanywhere around the deck. . . even at the corners.
    • Patented Sure-Lock® mechanismclamps the tower to the decklike a giant pair of locking pliersfor unbelievable stability andcontrol.
    • Variable height technologyoffers a range of six differentworking heights from 19”-40”.
    • Innovative Chief deck designwith 172 tie-down openings forvirtually unlimited holding andpositioning options.

    Learn More

    EZ-Liner Feature

    EZ Liner® Express

    A combination of quality and features that add up to real value in your shop! With five tons of affordable pulling power,you can have one in every bay! A high quality pulling system designed at a price you can afford.

    With a constant five tons of power at the hook and lifting capacity up to 5,500 lbs, the EZ Liner Express is a versatile pulling system for reversing light hits, as well as an all-purpose service lift/workstation for improving bay ergonomics and productivity on other collision repair tasks, including dismantling, sanding and painting.

    • Pivoting tower allows forperfect pulling angle
    • Adjustable collar createsproper pulling angle
    • Down-pulls outside of the deckare no problem. Simply attach theoptional down-pull attachment.
    • Tall anchor clamps allow compatibility withall Chief computerized measuring systems -anchors and clamps included

    Learn More



  • Frame Rack Footer