MULTIMIG 511

description

features

Request More Information

MultiMig 511

Welding and brazing of aluminum alloys, galvanized sheet metal, stainless, and high-strength steel.

MultiMig 511

A push-pull torch designed specifically to optimize aluminum welding.

Built-in cart for easy welder handling, Includes storage for gas cylinder

Synergic pulsed welder with full set of welding programs for easy use.

  • Synergic pulsed technology is required by most OEMs for aluminum welding. Includes a complete set of synergic programs in memeory for brazing, welding and aluminum wire.
  • Inverter technology enables precision electronic control of output power for better quality welds.
  • GREEN technology - Integrated Power Factor Correction (PFC) technology reduces input power by avoiding energy waste found in most electronic-based equipment and ultimately reduces operating costs. High Harmonic Distortion is hard on the power grid wasteful.
  • Two types of torches can be used with MultiMig power source - a standard MIG torch or the unique push-pull torch. The Chief Elektron Fusion Technologies push-pull system torch has an up-down digital current adjust at your finger tip, thanks to a feeder built into the grip. The very small and light weight torch (no bulky spool-gun) enables real-time control of welding process by control of the wire feed speed and current level. The push-pull system corrects many of the problems encountered when feeding and welding soft aluminum wire, down to 0.6mm.
  • Many programmable options are available to customize the unit's operation to meet most working conditions. Options include: Arc Length, 2 time, 4 time, Spot Time, Pause Time, Inductance, Burn Back, Soft Start etc. Can operate in pulse synergic, synergic, or conventional mode.

Product BrochureOperating ManualPush Pull Torch Manual

MultiMig 511 SPECIFICATIONS

Single phase input230V 50/60Hz +15% to -20%
Supply fuse rating (slow blow)30 A
Input power5.7 KVA 20%
 4.1 KVA 60%
 3.2 KVA 100%
Current adjustment range20A to 200A
Duty cycle (10 min 40°C)200A 20%
According to IEC 60974.1140A 60%
 120A 100%
Stepless regulationElectronic
Standard supplied 
synergic programs0.6/0.8/0.9/1.0
 Fe-Alu
 0.8/0.9 Stainless Steel - CuSi3
 0.9 Flux cored
Max. wire spool size"Ø 200 mm / 5 kg
 Ø 300 mm / 15 kg"
Protection classIP 23 S
Weight99.2 lbs
Dimensions inches18.9 x 33.7 x 32.5h