Request More Information

MULTISPOT MI-100control T

The MULTISPOT MI-100control T with transformer pliers - designed to assure the investment in the equipment.

MultiSpot Mi100 Control T
TrueAutoMode Logo

Automatically detects material type and thickness, weld time and tool changes while adjusting for variance in resistance. You get a perfect OEM approved weld every time.

The MULTISPOT® MI-100control-T delivers high quality inverter technology that assures perfect spot welding results. Designed for all car body repairs with high strength steels (e.g. Boron, USIBOR, TRIP, TWIP, XIP).

Use: Spot welding of structural body damage. Specially designed for high-strength steels such as Boron, TWIP, TRIP, USIBOR, XIP.

Process Reliability: Intelligent control technology allows a spot weld quality that is comparable to the quality achieved during the production process of new vehicles.

Protection of the Investment: The modular nature of the system "MULTISPOT" insures the investment in the equipment. Quick and easy tool change; new OEM welding programs can be added through software updates via compact flash card.

Efficient Spot Welding: The simple "MULTISPOT" operating concept requires only brief instructions and allows efficient operation of the equipment. The optional PC-software provides analytical capabilities i.e. to check the efficiency of the welding process.

  • Perfect welds every time
  • Designed for all vehicle body repairs
  • Recognizes and adjusts to tool changes
  • High performance light weight transformer pliers
  • Detects and adjusts welding parameters
  • Delivers uniform OEM approved quality
  • Logs data for each repair
  • Provides feedback on the quality of every weld
The MULTISPOT MI-100control resistance welder has been designed and built with the special requirements of body makers and maintenance in mind. The inverter, which provides the power for welding, is controlled by a microprocessor. That way, weld current and weld time will be adjusted automatically on the basis of the selected operating mode, sheet gauge and welding job. The automatic current adjustment facilitates a perfect reproducibility of welding results. The additional power needed for adjustment is taken from the mains.
  • Reliable, top quality German engineering
  • Quick tool change with automatic tool recognition
  • Perfect spot welding results
  • Wide range of car manufacturer approvals
  • High performance transfomer pliers
  • Impedance measurement for perfect results
  • Automatic readjustment of welding parameters, uniform quality from the first spot weld to the last one
  • Automatic detection for interference factors such as dirt, adhesives or protective coatings
  • 16 feet of welding cable for increased reach

Power supply unit:208-240 V (3 Phase)
Fuse:80 Amp Slow blowing
Connection Cable Length:33''
Frequency:50/60 Hz
Supply Power:42 kVA
Nominal power by 50 % ED60 kVA
Maximum welding current:12,000 A DC
Ambient temperature:104° F
Protective SystemIP 21
Power supply unit:Mobile
Total weight including accessories:approx. 187 lbs
Dimensions H / W / D:36.4'' / 25.6'' / 25.6''

Chief Automotive Technologies® reserves the right to alter product specifications and/or package components without notice. Check with Chief or your local Chief distributor on paint options and pricing.

Optional Accessories

Service Box
Service Box
AC Gun
AC Gun - 8 Feet
Balancer System
Balancer System
Balancer System
MTX-4900 Gun Head
MTC-5000 Gun Head

  • PC-Software (420 354)
  • X-Electrodes, watercooled, for wheel arches 05 MX (419 673)
  • X-Electrodes, watercooled, for profiles 02/06/415 MX (419 668)
  • X-Electrodes, watercooled L = 415 mm 01/415 MX (419 667)
  • X-Electrodes, watercooled L = 550 mm 01/550 MX (419 670)
  • Electrode Caps R 25 (418 759)
  • Additional Electrodes are available (please view catalogue)